Webinar Recordings

Filter by:

Files found: 54

Sort by: Alphabetical | Date
3D Motor Analysis with JMAG

See how JMAG is used to perform 3D motor analysis.

View Webinar Recording


Altair HyperWorks | Altair Solutions for Casting Simulation

Altair offers a complete solution for casting simulation benefiting different phases from early product development to final process optimization. Altair’s casting simulation suite of products include Click2Cast which is best suited for early feasibility and defect prediction and NovaFlow&Solid for advanced process validation and optimization. View the webinar to learn more about Altair's casting solutions.

View the Webinar Recording


Altair HyperWorks | Altair Solutions for Injection Molding

The Altair HyperWorks suite of products include tools to map, analyze and optimize the structural performance of injection-molded parts, interfacing directly with products like Moldex3D, a leader in providing the very best CAE injection molding simulation software. With the ability to simulate multiple types of manufacturing processes, Moldex3D gives user the opportunity through simulation to identify potential part defects and validation of part design. Moldex3D is an extremely valuable tool to ensure all aspects of the manufacture process have been optimized before a part actually goes into production. View the webinar to learn more about Altair's molding solutions offering.

View the Webinar Recording


Altair’s Solutions for Full-Vehicle NVH Analysis

An important factor in improving vehicle quality and perception is guided by how vehicles are designed for noise, vibration and harshness, making NVH an important domain for the automotive industry. Altair and its Alliance Partners offer a complete solution for automotive NVH applications.

In this 45-minute webinar, we will give an overview of problems faced in the automotive industry for NVH analysis and how HyperWorks and Altair’s Partner technologies help address these issues, providing a complete solution that spans from modeling and assembly to analysis, diagnostic and optimization.

Presenters:
Jianmin Guan, Director, Vibration and Acoustics Solutions, Altair
Vijay Ambarisha, Senior Project Engineer, ANSOL
Jerry Manning, President, Cambridge Collaborative
Francois-Xavier Becot, Co-manager, Matelys

View Webinar Recording


Analyzing Results and Other Post-Processing Features in JMAG Designer

Learn about the post-processing capabilities available in JMAG Designer.

View Webinar Recording


CFD Analysis on Electronics Applications Using scSTREAM

Learn about CFD solutions applicable to the electronics industry utilizing scSTREAM.

View Webinar Recording


Composites Material Modeling for Aerospace Applications Using Digimat

Digimat contains a complete framework for progressive Failure Modeling that allow to capture more accurately the failure scenario that can happen during the working conditions.

View Webinar Recording


Crash Cad Calculate for Axial Crushing

During this presentation of CCC – Design for Axial Crushing, the process of optimal design for axial crushing of a cross-section will be presented.

View Webinar Recording


Designing Composite Components for Automotive

Watch this 45-minute webinar recording to learn the latest advancements in composites design and optimization of carbon fiber composites and mixed material structures in the automotive industry.

Capabilities included in Altair HyperWorks as well as third party products available through the Altair Partner Alliance will be illustrated, showing real life examples of application.

View Webinar Recording


DSHplus Hydraulic and Pneumatic Actuator Models for Aerospace Applications

This webinar demonstrates how DSHplus is able to support the general engineering of aircraft hydraulic systems with simulation models at typical system level detail as well as with high-fidelity physical models, which allow a comprehensive performance analysis and which also support simulation driven optimization techniques, to improve the system's performance.

View Webinar Recording


Efficient Plastic Part Design Validation and Optimization for the Electronics Industry

Moldex3D provides state of the are injection molding capabilites for engineers and designers within the electronics industry. Watch this recording to learn more about their applications.

View Webinar Recording


Engine and Exhaust Modeling in RadTherm

This webinar covers modeling engine and exhaust heating in heavy equipment. The discussion will cover how RadTherm is used to quickly set up and analyze such complex thermal problems (steady-state or transient) that include conduction, multi-bounce radiation, and convection under realistic environments.

View Webinar Recording


Evaluate Where, When and Why Failure Occurs in Composite Structural Components Using GENOA

View a quick start tutorial on how to navigate in GENOA and perform D&DT analysis.

View Webinar Recording


FEMFAT Basic Training

Introduction to FEMFAT Basic, where you'll learn the different approaches to do fatigue analysis using FEMFAT.

View Webinar Recording


Finding the Ideal Location for your Part with Moldex3D

Moldex3D offers a true 3D analysis of a part, ensuring that all problematic issues have been addressed. One of the more overlooked problems in creating a part is picking where the best location for a gate should be. This webinar will cover how Moldex3D can help users to optimize their parts gate locations, and understand how gate location affects everything from how a part warps, to how well a part will pack out. 

View Webinar Recording


High Fidelity Vehicle Simulations Using MotionSolve-FTire and ChassisSim

Learn more about how you can leverage two of our leading multi-body simulation partners: cosin scientific software and ChassisSim Technologies for accurately performing vehicle simulations.

View Webinar Recording


How to Optimize the Thickness of Investment Castings for the Aerospace Industry

During this webinar we will highlight the functionality and potentials using NovaFlow&Solid, specifically for investment casting manufacturing and development of aerospace castings.

View Webinar Recording


Innovative CFD Software SC/Tetra for automotive applications

CFD software provider Software Cradle presents their solution SC/Tetra for the automotive industry.

View Webinar Recording


Introduction to AcuNexus by Novus Nexus

Learn about the CFD offerings available through the APA, using AcuNexus by Novus Nexus.

View Webinar Recording


Introduction to AFDEX by MFRC

AFDEX is a general-purpose metal forming simulator originally dedicated to the analysis of forging process, and it is based on rigid-elasto/thermo/viscoplastic finite element method.

View Webinar Recording


Introduction to AlphaCell by MATELYS

Learn about the NVH offerings available through the APA, using AlphaCell by Matelys.

View Webinar Recording


Introduction to Analyswift Software SwiftComp Micromechanics

Learn about the composites technology solutions available through the APA, using SwiftComp by Analyswift.

View Webinar Recording


Introduction to Charge by Fieldscale

Charge is the state-of-the-art tool for electric field analysis, detecting dielectric breakdowns, partial discharges and extracting parasitic capacitances.

View Webinar Recording


Introduction to ChassisSim

Learn about the multi body vehicle dynamics offerings available through ChassisSim.

View Webinar Recording


Introduction to Click2Cast for Casting Simulation

Learn about the Casting Simualation offerings available through the APA, using Click to Cast by Quantech ATZ.

View Webinar Recording


Introduction to Crash Cad Calculate

This 45 minute recording provides an introduction to the company Impact Design and their software Crash Cad Calculate.

View Webinar Recording


Introduction to Design Profit by Munro & Associates

Learn about the complexity management offerings available using Design Profit by Munro & Associates.

View Webinar Recording


Introduction to EFEA by MES for NVH

Learn about the NVH offerings available through the APA, using EFEA by MES.

View Webinar Recording


Introduction to GENOA and MCQ

Learn about the composite model offerings available through GENOA and MCQ by AlphaStar, now included within the APA lineup.

View Webinar Recording


Introduction to Insight+ by Brüel & Kjær

Insight+ creates the ability to efficiently consider test and CAE data together to assist engineers in better understanding NVH contributions early in the design process. View this on-demand webinar to learn more.

View Webinar Recording


Introduction to JMAG-Express – Easy, Fast Motor Design Tool 

Learn about the structure of JMAG-Express, using its quick mode with predefined templates, modify templates, utilizing Power Mode and linking a JMAG Express model with JMAG Designer for full FEA.

View Webinar Recording


Introduction to KTex Family by CEDREM

KTex Family is a set of tools dedicated to composite materials to represent them precisely at the scale of the yarns and take into account the impact of manufacturing processes on their mechanical properties.

View Webinar Recording


Introduction to LinceoVR by Seac02

Learn about the rendering capabilities available through LinceoVR by Seac02, now available through the APA.

View Webinar Recording


Introduction to LOGEengine & LOGEsoft

This webinar introduces users to LOGEengine & LOGEsoft, 2 CFD products offered to APA users by LOGE AB.

View Webinar Recording


Introduction to LW Finder by LW Engineering

LW Finder takes the guesswork out of strain gauge placement. LW Finder provides accuracy and control when using strain gauges to measure structural loads. It finds the best locations to place strain gauges and predicts measurement error.

View Webinar Recording


Introduction to Maple and MapleSim by Maplesoft

Maple and MapleSim by Maplesoft are advanced mathematical and analytic tools applicable to engineers, mathematicians and scientists.

View Webinar Recording


Introduction to MDS by Multiscale Design Systems

Learn about the composite model offerings available through MDS by Multiscale Design Systems.

View Webinar Recording


Introduction to nanoFluidX by FluiDyna

nanoFluidX is a particle-based fluid dynamics simulation tool to predict the flow in complex geometries with complex motion.

View Webinar Recording


Introduction to NovaFlow&Solid CV

Learn about casting simulation software NovaFlow&Solid CV by NovaCast with this introduction recording.

View Webinar Recording


Introduction to Project Team Builder (PTB) by Sandbox Model

Learn about the Project Management capabilities offered through the APA, using PTB by Sandbox.

View Webinar Recording


Introduction to ultraFluidX by FluiDyna

ultraFluidX is specifically suited to predict aerodynamic properties for vehicles of all types as well as to analyze building and environmental aerodynamics with unbeatable speed. The software is based on the Lattice Boltzmann Method and especially designed to leverage GPU technology, providing users with supreme performance and dramatically reducing the model preparation time for large, complex models.

View Webinar Recording


Introduction Webinar to ThermoFlo

Learn about thermal solution ThermoFlo by TES International with this introduction recording.

View Webinar Recording


Learn about Key to Metals' Premium Edition Software

Key to Metals AG presents its Premium Edition which gives the entire wealth of Standard and Extended Range plus some exciting new additions.

View Webinar Recording


Making Material Libraries with AlphaSTAR's MCQ Composite Software

Instructs a user how to export and import material libraries in MCQ Composites. Hosted by Cody Godines.

View Video


Multi-Scale Progressive Fatigue/Failure Analysis Using GENOA

A quick overview on how GENOA models Multi-Scale Progressive Fatigue/Failure Analysis in Composite Structure made of continuous fiber-reinforced polymer matrix (CFRP).

View Webinar Recording


Occupant Safety Analysis for Aviation

This webinar demonstrates the use of MADYMO FAA dummies in aviation research on estimating the lumbar load tolerances for the 5th and 95th percentile sizes based on scaling of the FAA Hybrid-III 50th percentile.

View Webinar Recording


Optimizing Cooling Lines to Reduce Warp Issues with Moldex3D

Cooling layout can be crucial to creating a good quality part. This webinar aims to show how Moldex3D ensures that the cooling layout have been optimize to their fullest potential.

View Webinar Recording


Prognostics Technology: DigitalClone Multiphysics Solver of Rolling Contact, Bending, and Fretting Fatigue Failures Webinar

Learn about the Durability offerings available through the APA, using Digital Clone by Sentient Science.

View Webinar Recording


SEAM for Statistical Energy Analysis in Automobiles

See how to use SEAM to study the dynamic response of complex structures at mid and high frequencies.

View Webinar Recording


Seam Weld Fatigue Analysis in DesignLife Tutorial 2013

This web-based tutorial will provide an introduction for using nCode DesignLife to perform seam weld fatigue analysis on FE models.

View Webinar Recording


Tension after Impact: Damage Progression Coupling Different Structural FE Solvers in Sequence

Learn how GENOA can be used to couple different analysis types together using different FE solvers so that advanced structures can be analyzed and assessed for damage initiation and propagation, fracture initiation and propagation using the engineering technology of choice.

View Webinar Recording


Unleash Optimal Plastic Design in 60 Minutes

View a demo of Moldex3D’s ground-breaking product, eDesign Suite, which offers an easy-to-use yet powerful simulation tool to visualize flow and thermal properties to achieve design validation.

View Webinar Recording


Using ThermoFlo to speed up your engineering calculations

Learn how to use ThermoFlo to quickly do many of the back of the envelope calculations that are part of an engineer’s everyday life. Quickly size components or get a feel for a temperature without having to use any property lookup tables.

View Webinar Recording


Workflow Optimization using Design Profit

Learn about the workflow optimization capabilities available through the APA, using Design Profit by Munro & Associates.

View Webinar Recording


Legend public legend Public guest legend Guest member legend Member