Webinar Recordings

Filter by:

Files found: 156

Sort by: Alphabetical | Date
Model analysis of cricket bat

Webinar hosted by TechPassion focusing on the modal analysis of a cricket bat.

View Webinar Recording


Test, Risk and Cost Reduction Using MCQ and MS-PFA GENOA in a Building Block Approach for Impact and Compression after Impact.

In this webinar, AlphaSTAR Corporation (ASC) demonstrates a validated analysis verified by test for composite structure using its proprietary MCQ & GENOA software. The webinar presents the process by which an end user, in this case the ASC team, would qualify a newly developed resin for a laminated plate.

View Webinar Recording


1D, 2D, and 3D, Unidirectional, Weave, and Braid Modeling and Reverse Engineering Constituent Properties for Use in Multi Scale Progressive Failure Analysis

Learn how GENOA and MCQ can be used to determine the constituent properties – fiber, matrix, and stress strain curves for unidirectional composites.

View Webinar Recording


3D Motor Analysis with JMAG

See how JMAG is used to perform 3D motor analysis.

View Webinar Recording


Advanced eDesign 2014 with Moldex3D

This webinar will go over the basic fundamentals how to properly utilize Moldex3D and show some of the more advanced features that users may not be aware of.

View Webinar Recording


Advanced Topics in nCode DesignLife

During this session, attendees will learn best practices for improving computational throughput and identifying critical locations in their design.

View Webinar Recording


Aerospace Defense Stress Analysis with StressCheck

Over the past 25 years, ESRD has pioneered and developed an advanced FEA numerical simulation technology that is well-suited for detailed stress analysis of complex parts associated with the aerospace defense industry.

View Webinar Recording


Aerospace Fracture Mechanics using StressCheck

See how Stress Check is used to simulate fracture mechanics within the Aerospace industry.

View Webinar Recording


Altair’s Solutions for Full-Vehicle NVH Analysis

An important factor in improving vehicle quality and perception is guided by how vehicles are designed for noise, vibration and harshness, making NVH an important domain for the automotive industry. Altair and its Alliance Partners offer a complete solution for automotive NVH applications.

In this 45-minute webinar, we will give an overview of problems faced in the automotive industry for NVH analysis and how HyperWorks and Altair’s Partner technologies help address these issues, providing a complete solution that spans from modeling and assembly to analysis, diagnostic and optimization.

Presenters:
Jianmin Guan, Director, Vibration and Acoustics Solutions, Altair
Vijay Ambarisha, Senior Project Engineer, ANSOL
Jerry Manning, President, Cambridge Collaborative
Francois-Xavier Becot, Co-manager, Matelys

View Webinar Recording


Analyzing Results and Other Post-Processing Features in JMAG Designer

Learn about the post-processing capabilities available in JMAG Designer.

View Webinar Recording


Applications in the Simulation of Truck Dynamics using TruckSim

The objectives of the webinar will be to provide users with an introduction to the TruckSim software with enough detail to help them see potential applications for solving vehicle dynamics problems in their enterprise.

View Webinar Recording


Brief Demo of CoDA by Anaglyph

Brief demo of CoDA, which can be used to undertake preliminary analysis of sub-components with Plate, Beam, Joint, Flange or Laminate geometries.

View Demo


Brief Demo of LAP by Anaglyph

Brief demo of LAP, which can be used to analyze any type of composite laminate subjected to in-plane loads and moments.

View Demo


Casting Simulation for the Automotive Industry using Click2Cast

In this webinar, participants will learn how to use Click2Cast, a quick and easy to use validation tool. It will be shown how simple is to create a simulation to validate a component design or a manufacturing process before the production. The final goal is to show that simulation can be applied also during design stage in a very simple way and giving great results.

View Webinar Recording


Casting Simulation for the Electronics and Consumer Goods Industry using Click2Cast

In this online webinar, participants will learn how to use Click2Cast, a quick and easy to use validation tool. It will be shown how simple is to create a simulation to validate a component design or a manufacturing process before the production.

View Webinar Recording


Casting Simulation for the Manufacturing Industry using Click2Cast

See how Click2Cast can be used to allow users to enhance and optimize their manufactured components avoiding typical casting defects.

View Webinar Recording


CFD Analysis on Electronics Applications Using scSTREAM

Learn about CFD solutions applicable to the electronics industry utilizing scSTREAM.

View Webinar Recording


Chopped Fiber Multi-scale Material Modeling for Automotive Design Using a De-homogenized Approach

The webinar will introduce MCQ Chopped from AlphaSTAR to the APA community. It will provide a description of the theoretical foundation of the software, which will explain how and why the product delivers accurate and reliable result in predicting material properties of chopped fiber laminates.

View Webinar Recording


Competitive Advantages in using EFEA for NVH Analysis for Automotive Applications

This webinar will showcase how to use Energy Finite Element Analysis (EFEA) for mid to high frequency noise and vibration simulations.

View Webinar Recording


Composite and Reinforced Plastics Material Modeling for FEA Automotive Design

To predict accurately the safety, NVH, statics and fatigue performance of fiber reinforced polymers (FRP) parts in the automotive industry requires an advanced material model to take into account the effects of the manufacturing process on the local materials stiffness and strength.

View Webinar Recording


Composite Beam - Modal Analysis

Composite Beam - Modal Analysis

View Webinar Recording


Composite Material Analysis using StressCheck

Topics covered include: Composite materials, one of the most demanding analysis categories, and multiscale opportunities that StressCheck provides.

View Webinar Recording


Connecting Data Analytics With Supply Chain Optimization to Reduce Operational Costs, Capital, and Time

In this webinar we will discuss the top challenges that are being presented in today's industries. Learn how owner/operators and OEMs use DigitalClone prognostic to better plan for future failure in order to reduce cost and optimize supply chain efforts.

View Webinar Recording


Continuous Fiber Composites for Aerospace featuring DIGIMAT

Learn how DIGIMAT can be used to help engineers using continuous fiber reinforced composite materials in the aerospace industry.

View Webinar Recording


CONVERSE – Software for Accurate FE-Simulation of Plastic Automotive Applications

Using the anisotropic material behavior of short fiber reinforced plastics by assigning the fiber orientation and appropriate material behavior to your parts easily. The general procedure and the outcoming benefit will be shown with industrial part examples using the software CONVERSE.

View Webinar Recording


CONVERSE Online Training: FEA of Short-Fiber-Reinforced Plastics

See how CONVERSE by PART Engineering bridges the gap between injection molding simulation and mechanical simulation.

View Recorded Training


Crash Cad Calculate for Axial Crushing

During this presentation of CCC – Design for Axial Crushing, the process of optimal design for axial crushing of a cross-section will be presented.

View Webinar Recording


Crash Cad Calculate for design and optimization of cross sections in a vehicle structure

This webinar will showcase several use cases illustrating the potential of Crash Cad Calculate (CCC) software in design and optimization of cross sections used in various assemblies of a vehicle structure with specific focus on design and optimization routines as well as import – export procedures.

View Webinar Recording


Crash Material Model Parameter Generation and Validation for Ductile Plastics

The Matereality Workgroup Material DatabasePro solution enabled through the Altair Partner Alliance allows Altair HyperWorks users access to browser-based software to build and maintain productivity enhancing material databases on the same platform that they use for product design. The integration of materials data with CAE tools strengthens the material core of their group’s PLM.

View Webinar Recording


Cross Section Creator & CCC – Easy Cross Section Analysis and Optimization for Crash

This webinar introduces users to the newest software from Impact Design, Cross Section Creator (CSC). This new tool, which enriches the functionality and capabilities of Crash Cad Calculator (CCC), provides the possibility of fast and easy extraction of cross sections from a mesh model and consequently closes the optimization and design loop.

View Webinar Recording


Damage Simulation of Composites due to Impact Loads using GENOA by AlphaStar

GENOA allows impact damage foot print estimates and residual stress from dynamic impact simulations to establish the initial conditions in for post impact residual strength prediction.

View Webinar Recording


Delamination in Laminated Composites – Coupling of GENOA PFA and VCCT/DCZM

Learn to navigate for GENOA for Delamination Analysis.

View Webinar Recording


Design Profit Click2Cost Fuel Rail Demo

Design Profit Click2Cost Demonstration using "Fuel Rail".

View Video


Designing Composite Components for Automotive

Watch this 45-minute webinar recording to learn the latest advancements in composites design and optimization of carbon fiber composites and mixed material structures in the automotive industry.

Capabilities included in Altair HyperWorks as well as third party products available through the Altair Partner Alliance will be illustrated, showing real life examples of application.

View Webinar Recording


Detailed Stress Analysis with StressCheck

StressCheck, representing 5th Generation FEA software, produces the world’s highest fidelity results and delivers guaranteed reliability.

View Webinar Recording


Digimat for the Composites Industry

Learn about the features of Digimat, the Material Modeling Platform, for the design of high performance composites structures.

View Webinar Recording


Digital Signal Processing with DesignLife

Learn about DesignLife's comprehensive collection of data processing tools for analyzing data, from Multi Body Dynamics to Physical Tests.

View Webinar Recording


Driving accurate engineering decisions through comprehensive material knowledge with Total Materia

Total Materia provides the world’s most comprehensive material properties database covering over 250,000 metals, plastics, composites and a range of other non-metallic materials. This webinar is designed to help demonstrate how having the right information available at the right time can not only save hours and even days of sourcing but improve information accuracy and help optimize early critical design decisions.

View Webinar Recording


DSHplus for Auto: Identification of pressure pulsations in low pressure lines

In this webinar, you will learn how to use DSHplus to gain insight into modeling, simulation and analysis of transmission behavior of fuel line in the low pressure range.

View Webinar Recording


Effect of Voids, Defect Shapes and Sizes, and Fiber Waviness on Fatigue Life using GENOA & MCQ

Learn how GENOA and MCQ can be used to determine the effect of voids, defect shapes and sizes, and fiber waviness on fatigue life.

View Webinar Recording


Efficient Plastic Part Design Validation and Optimization for the Electronics Industry

Moldex3D provides state of the are injection molding capabilites for engineers and designers within the electronics industry. Watch this recording to learn more about their applications.

View Webinar Recording


Energy Finite Element Analysis for the Mobility Industry

The EFEA method uses energy based primary variables instead of pursuing a displacement based solution as the FEA method does.

View Webinar Recording


Engine and Exhaust Modeling in RadTherm

This webinar covers modeling engine and exhaust heating in heavy equipment. The discussion will cover how RadTherm is used to quickly set up and analyze such complex thermal problems (steady-state or transient) that include conduction, multi-bounce radiation, and convection under realistic environments.

View Webinar Recording


ESAComp for Enhancing HyperWorks in Composite Structures Design

The webinar gives an introduction to ESAComp as stand-alone tool, starting with a few success stories and explaining distinct features in a live demo. Special focus is given to the benefits of integrating ESAComp into the composite design workflow within HyperWorks 13.

View Webinar Recording


ESAComp supporting the composite design process in the Automotive Industry

With the automotive industry more and more exploring the capabilities of composite materials, engineers face new challenges throughout the design process. For layered composite structures ESAComp is the right software to help you. This webinar will provide an overview on how to use ESAComp to efficiently tackle daily tasks concerning laminate design towards stiffness or strength criteria, structural elements (e.g. panels), data exchange with HyperWorks and integration into a workflow for optimization.

View Webinar Recording


Evaluate Where, When and Why Failure Occurs in Composite Structural Components Using GENOA

View a quick start tutorial on how to navigate in GENOA and perform D&DT analysis.

View Webinar Recording


Experimental Modal Analysis of Gear Box Casing

Webinar hosted by TechPassion focusing on expermiental modal analysis of a gear box casing along with an electromagnetic shaker.

View Webinar Recording


Fatigue analysis in Heavy Industries – the larger the vehicle the higher the need for endurance on misuse

FEMFAT offers fatigue life prediction (FLP) of all vehicle components (engine, gearbox, chassis, frames, car bodies and structures) and machinery equipment based on Finite Element Analyses (FEA). Additionally to consideration of complex multi-axial loadings an assessment of welding seams as well as spot welds and self piercing rivets in steel and aluminium can be carried out.

View Webinar Recording


Fatigue analysis on thermal load cycles by FEMFAT HEAT

This 45-minute webinar shows how FEMFAT heat is used for low cycle fatigue analysis of components that suffer from thermo-mechanical fatigue.

View Webinar Recording


Fatigue Analysis with Complex Loading in DesignLife

During this session, attendees will learn how to use nCode DesignLife to model non-linear geometric loads, rotating loads and static pre-loads in combination with cyclic loads.

View Webinar Recording


Fatigue Analysis with Non-linear Geometric Loading

This web-based tutorial will provide an introduction for performing fatigue analysis in nCode DesignLife on structures that have non-linear geometry loading.

View Webinar Recording


Fatigue of Welds for Heavy Equipment using DesignLife

This webinar will review underlying methodology and approaches in DesignLife for predicting the fatigue life of welds using finite element models consisting of either shell or solid elements. A demonstration will review how DesignLife can be used for predicting fatigue life using a weld definition created by HyperMesh and stress results from OptiStruct.

View Webinar Recording


FEA Correlation of Aluminum Gear Box Casing

Webinar hosted by TechPassion focusing on test to FEA correlation of a cast aluminum gear box casing.

View Webinar Recording


FEMFAT Basic Training

Introduction to FEMFAT Basic, where you'll learn the different approaches to do fatigue analysis using FEMFAT.

View Webinar Recording


FEMFAT Joining Techniques using FEMFAT spot & FEMFAT weld

Learn how to use FEMFAT for FE modeling of joints, remeshing, avoiding singularities like stresses from beams or connectors and more.

View Webinar Recording


FEMFAT Webinar: Fatigue analysis is everywhere

FEMFAT is applied to mechanical systems in nearly all disciplines involving fatigue aspects. Engineers can follow the results and obtain approval from regulations such as GL Wind Renewables, IIW, Eurocode3 and British Standards.

View Webinar Recording


Finding the Ideal Location for your Part with Moldex3D

Moldex3D offers a true 3D analysis of a part, ensuring that all problematic issues have been addressed. One of the more overlooked problems in creating a part is picking where the best location for a gate should be. This webinar will cover how Moldex3D can help users to optimize their parts gate locations, and understand how gate location affects everything from how a part warps, to how well a part will pack out. 

View Webinar Recording


Frequency Response using FEMFAT Spectral Module

Learn about the frequency response capabilities available in FEMFAT's Spectral Module.

View Webinar Recording


From Injection Molding to Mechanical Simulation - Added Value for FEA Through Integrated Solutions with CONVERSE

In this webinar, learn how CONVERSE can be used effectively for electronics and consumer goods made of plastics. FEA is frequently applied, as often these products undergo high mechanical as well as thermal loads a proper strength assessment is decisive.

View Webinar Recording


Get to Know SwiftComp Micromechanics

Learn the basics of SwiftComp Micromechanics and see how it can be applied to your composite modeling projects.

View Webinar Recording


High Fidelity Vehicle Simulations Using MotionSolve-FTire and ChassisSim

Learn more about how you can leverage two of our leading multi-body simulation partners: cosin scientific software and ChassisSim Technologies for accurately performing vehicle simulations.

View Webinar Recording


High Speed Impact Analysis on Advanced, Lightweight Materials using MultiMech

This 1/2 hour session will offer a brief introduction of the MultiMech software and a detailed training on the modeling and structural analysis of composites experiencing dynamic loads and ballistic impacts

View Webinar Recording


Improving Success Rates in Defense Projects using PTB

In this webinar the PTB Analytics, an advanced project planning tool will be presented along with relevant information for how it helps users achieve better project results. A specific use case from the defense industry will be used.

View Webinar Recording


Innovative CFD Software SC/Tetra for automotive applications

CFD software provider Software Cradle presents their solution SC/Tetra for the automotive industry.

View Webinar Recording


Integration between Moldex3D and HyperStudy Improving Part Quality for Injection Molding in the Automotive Industry

In this webinar, we will present step-by-step about how to integrate Moldex3D with HyperStudy to perform the DOE analysis to optimize the injection molding process. Industrial cases will be presented to showcase the advantages of the integrate analysis.

View Webinar Recording


Introduction to 3-maticSTL by Materialise

3-maticSTL is the ideal tool for quickly bringing topology-optimized files back to CAD, or cleaning files to send to a 3D printer.

View Webinar Recording


Introduction to AcuNexus by Novus Nexus

Learn about the CFD offerings available through the APA, using AcuNexus by Novus Nexus.

View Webinar Recording


Introduction to AlphaCell by MATELYS

Learn about the NVH offerings available through the APA, using AlphaCell by Matelys.

View Webinar Recording


Introduction to Analyswift Software SwiftComp Micromechanics

Learn about the composites technology solutions available through the APA, using SwiftComp by Analyswift.

View Webinar Recording


Introduction to CADdoctor by Elysium

CADdoctor is a software that does 3D data translation and geometry repair and simplification for CAE.

View Webinar Recording


Introduction to CAEfatigue VIBRATION: Random Response + Fatigue in the Frequency Domain

Frequency domain analysis is the method of choice for dynamic analysts and CAEfatigue VIBRATION will act like a turbo charger for such methods. This makes it a valuable new tool for durability estimates on large automotive systems and fatigue life calculations for aerospace systems where mixed random and deterministic loads are specified.

View Webinar Recording


Introduction to CCC 2.0 - Newest Functionality & Import Geometry from HyperBeam

Learn about the new tools and functionality available in CCC 2.0.

View Webinar Recording


Introduction to ChassisSim

Learn about the multi body vehicle dynamics offerings available through ChassisSim.

View Webinar Recording


Introduction to Click2Cast for Casting Simulation

Learn about the Casting Simualation offerings available through the APA, using Click to Cast by Quantech ATZ.

View Webinar Recording


Introduction to Coustyx Online Training

This online training provides a two-hour basic-level training on the application of Coustyx for acoustic simulations.

View Webinar Recording


Introduction to Crash Cad Calculate

This 45 minute recording provides an introduction to the company Impact Design and their software Crash Cad Calculate.

View Webinar Recording


Introduction to Design Profit by Munro & Associates

Learn about the complexity management offerings available using Design Profit by Munro & Associates.

View Webinar Recording


Introduction to EFEA by MES for NVH

Learn about the NVH offerings available through the APA, using EFEA by MES.

View Webinar Recording


Introduction to ElectroFlo

An introduction to ElectroFlo, a software for electronics cooling.

View Webinar Recording


Introduction to GENOA and MCQ

Learn about the composite model offerings available through GENOA and MCQ by AlphaStar, now included within the APA lineup.

View Webinar Recording


Introduction to JMAG-Express – Easy, Fast Motor Design Tool 

Learn about the structure of JMAG-Express, using its quick mode with predefined templates, modify templates, utilizing Power Mode and linking a JMAG Express model with JMAG Designer for full FEA.

View Webinar Recording


Introduction to LinceoVR by Seac02

Learn about the rendering capabilities available through LinceoVR by Seac02, now available through the APA.

View Webinar Recording


Introduction to Maple and MapleSim by Maplesoft

Maple and MapleSim by Maplesoft are advanced mathematical and analytic tools applicable to engineers, mathematicians and scientists.

View Webinar Recording


Introduction to Matereality Workgroup Material Database Pro

Learn how Matereality offers the building tools and engineer-focused software to allow workgroups to collect, share, and use any material data in full interactive detail, using a patented technology to store any properties of any material on a single platform.

View Webinar Recording


Introduction to MDS by Multiscale Design Systems

Learn about the composite model offerings available through MDS by Multiscale Design Systems.

View Webinar Recording


Introduction to nCode DesignLife 10.0 Tutorial

The tutorial will provide an introduction to the nCode user interface and attendees will become familiar with how 'glyphs' are used to create processes. Both Stress-Life (SN) and Strain-Life (EN) fatigue calculations on FE models will be demonstrated.

View Webinar Recording


Introduction to NovaFlow & Solid CV – Casting process simulation

The webinar is intended that the attendees will learn more about the functionality and potentials using NovaFlow&Solid CV for Heavy Industry manufacturing and development of the castings. NovaFlow&Solid CV is a casting process simulation program that we believe is FASTER, EASIER and MORE accurate than the competing softwares.

View Webinar Recording


Introduction to NovaFlow&Solid CV

Learn about casting simulation software NovaFlow&Solid CV by NovaCast with this introduction recording.

View Webinar Recording


Introduction to Project Team Builder (PTB) by Sandbox Model

Learn about the Project Management capabilities offered through the APA, using PTB by Sandbox.

View Webinar Recording


Introduction to STRENGTH2000® by Airbus Defence and Space

Learn more about how STRENGTH2000® is used within the aerospace industry for Airframe Strength and Stability Analysis.

View Webinar Recording


Introduction to Virfac by GeonX

Virfac® addresses the advanced simulation of welding processes (fusion, friction stir, inertia friction, etc.), heat treatment, surface treatment, carburizing, additive manufacturing and damage tolerance based on the XFEM technology.

View Webinar Recording


Introduction Webinar to ThermoFlo

Learn about thermal solution ThermoFlo by TES International with this introduction recording.

View Webinar Recording


LAP and CoDA: Your tools for composites preliminary analysis and post-processing in Automotive design

This webinar will show how automotive designers can use LAP and CoDA to prepare a laminated plate or structure, examine its behavior under load, overall or layer-by-layer. LAP checks specific points of any laminate, whilst CoDA examines the structure as a whole.

View Webinar Recording


Learn about Cambridge Collaborative's NVH Solution, SEAM

Introduction to Cambridge Collaborative's NVH solution, SEAM.

View Webinar Recording


Learn about Key to Metals' Premium Edition Software

Key to Metals AG presents its Premium Edition which gives the entire wealth of Standard and Extended Range plus some exciting new additions.

View Webinar Recording


Life Cycle Analysis of Automobile Components

Webinar hosted by TechPassion focusing on the life cycle analysis of automobile components.

View Webinar Recording


Life Extension: Using DigitalClone by Sentient Science to Predict and Extend Fatigue and Wear Life Before Qualification Testing

See how DigitalClone from Sentient Science computationally predict and extend life for bearings and gearboxes before or as part of testing cycles.

View Webinar Recording


Making Material Libraries with AlphaSTAR's MCQ Composite Software

Instructs a user how to export and import material libraries in MCQ Composites. Hosted by Cody Godines.

View Video


Model-Based Design and Development in Automotive Applications using Maple and MapleSim

This webinar will present a range of comprehensive examples using MapleSim to model complex automotive systems. Specific case studies will include full vehicle modeling, active suspension, stability control, steering and more.

View Webinar Recording


Moldex3D for the Manufacturing Industry

See how Moldex3D is used to enable in-depth simulation of a wide application range of injection molding processes.

View Webinar Recording


Motorsport to Automotive - Crossing the thought barrier. Using ChassisSim solve your vehicle dynamics problems quickly.

This webinar will cover how you can use ChassisSim to quickly construct a high fidelity multibody vehicle model and use the features of ChassisSim to get the answers you need quickly for both motor sport and automotive use.

View Webinar Recording


Multiaxial Fatigue using FEMFAT Max

Learn how to use FEMFAT Max for Fatigue Life Predicition for mulit axial loaded components.

View Webinar Recording


MultiMechanics for the Composites Industry

This training will be a broad overview of the challenges associated with the modeling and simulation of composite parts and will be useful for materials and design engineers who are currently working with or interested in working with advanced materials.

View Webinar Recording


Multiscale Design Systems (MDS) for the Composites Industry

Unlike competing multiscale products, MDS is based on the scale-separation-free stochastic reduced order multiscale method, resulting in unmatched combination of practicality, mathematical rigor, verifiability and versatility.

View Webinar Recording


Multi-Scale Progressive Fatigue/Failure Analysis Using GENOA

A quick overview on how GENOA models Multi-Scale Progressive Fatigue/Failure Analysis in Composite Structure made of continuous fiber-reinforced polymer matrix (CFRP).

View Webinar Recording


New Developments in Total Materia Premium Edition, including HyperMesh Integration

Showcasing the new Total Materia Premium Edition, see exactly how you can gain access to properties for over 240,000 metallic and non-metallic materials, use international cross reference tables, search stress strain and cyclic properties and much much more.

View Webinar Recording


NovaCast Training Level 1 - Basic

Introductory training for NovaFlow&Solid CV by NovaCast.

View Recorded Training


NovaCast Training Level 2 - Improve your casting design using NovaFlow&Solid CV

Mid-level training using NovaFlow&Solid to improve your casting designs.

View Recorded Training


NovaCast Training Level 3 – Advanced

Advanced training for NovaFlow&Solid CV.

View Recorded Training


NVH Solutions using SEAM for Heavy Industry

Learn how Cambridge Collaborative's NVH software, SEAM, can be applied to heavy industry.

View Webinar Recording


Online Training: ChassisSim by ChassisSim Technologies

This training will cover everything you need to get going with ChassisSim and will also introduce you to the advanced features of ChassisSim.

View Recorded Training


Online Training: Click2Cast by Quantech ATZ

Learn the basics of Click2Cast and how to utilize it together with HyperWorks.

View Recorded Training


Online Training: Crash Cad Calculate by Impact Design Europe

Crash Cad Calculate (CCC) is an unique software for design and optimization of thin walled cross sections for beams used to create crashworthy of any structure.

View Recorded Training


Online Training: Design Profit by Munro & Associates

Introductory training for Design Profit by Munro & Associates.

View Recorded Training


Online Training: ESAComp by Componeering

Learn the basics of ESAComp in under 2 hours. The training covers material database, creation and evaluation of laminates, load response/failure analysis of structural elements as well as FE import and export capabilities.

View Recorded Training


Online Training: GENOA (Multi-Scale Progressive Failure Analysis) Virtual Training

This training will cover the concepts for composite analysis ‘from start to finish’. Students will leave with the ability to begin performing sub element verifications with calibrated (verified and validated) inputs.

View Recorded Training


Online Training: Introduction to Maple by Maplesoft

Maple helps you analyze, explore, visualize, and solve mathematical problems. It is a complete, rapid solution development environment for technical organizations.

View Recorded Training


Online Training: MapleSim by Maplesoft

Learn how to efficiently handle the complex mathematics involved in the development of engineering models, including multi-domain systems, plant modeling, and control design.

View Recorded Training


Online Training: Optimize your hydraulic systems with DSHplus

This basic entrance into fluid power simulation shows and explains the daily work with DSHplus.

View Recorded Training


Online Training: PTB by Sandbox Model (Part 1)

See how using PTB results in better decision making, more accurate forecasts and ultimately better project results.

View Recorded Training


Online Training: PTB by Sandbox Model (Part 2)

See how using PTB results in better decision making, more accurate forecasts and ultimately better project results.

View Recorded Training


Online Training: Total Materia by Key to Metals

The Total Materia Premium Edition training session, exclusively for Altair users will cover extensive demonstrations within the product and show how to navigate and effectively find material properties data.

View Recorded Training


Online Training: Using MultiMech's TRUE Multiscale technology to predicting mechanical response of textile composites

This online training provides a brief introduction of the MultiMech software and a detailed training on the modeling and structural analysis of textile composites.

View Recorded Training


Online Training: Workgroup Material DatabasePro by Matereality

Workgroup Material DatabasePro provides partner-enabled HyperWorks users with browser-ready software to build and maintain productivity enhancing material databases on the same platform that they use for product design, closely integrating materials data with CAE tools.

View Recorded Training


Optimized Casting Design by Help of Casting Process Simulation

NovaFlow&Solid CV is a mold filling and solidification simulation package based on advanced fluid flow and heat transfer theories.

View Webinar Recording


Optimizing Cooling Lines to Reduce Warp Issues with Moldex3D

Cooling layout can be crucial to creating a good quality part. This webinar aims to show how Moldex3D ensures that the cooling layout have been optimize to their fullest potential.

View Webinar Recording


Optimizing Runner Layouts with Moldex3D

See how Moldex 3D's runner analysis capabilities allows users to see exactly how well their part is filling and if there is any shear heating that would prevent a balanced fill.

View Webinar Recording


Optimizing Sound Package Absorption using SEAM by Cambridge Collaborative

SEAM software gives engineers the tools to model sound package performance in automotive cabins. View this webinar to see how SEAM can be applied to your NVH projects.

View Webinar Recording


Overview of FEKO Suite 6.3

This tutorial will give an overview of the new features in new release FEKO Suite 6.3. The following features will be highlighted: Support of curvilinear elements, higher order basis functions, understanding radiation through characteristic mode analysis.

View Webinar Recording


Predicting the Vibro-Acoustic Responses of Multi-Layer Systems using AlphaCell

AlphaCell is a complete and accurate TMM/FTMM solution to predict the vibro-acoustic response of multi-layer systems under various excitations (airborne, structure borne, turbulent boundary layer).

View Webinar Recording


Prognostics Technology: DigitalClone Multiphysics Solver of Rolling Contact, Bending, and Fretting Fatigue Failures Webinar

Learn about the Durability offerings available through the APA, using Digital Clone by Sentient Science.

View Webinar Recording


Save your energy with 3-maticSTL in the after topology optimization process

This webinar focuses on 3-maticSTL's complimentary position to Altair’s topology optimization and illustrates its capabilities on light weight structures design, with a focus on printable design.

View Webinar Recording


SEAM for Statistical Energy Analysis in Automobiles

See how to use SEAM to study the dynamic response of complex structures at mid and high frequencies.

View Webinar Recording


Seam Weld Fatigue Analysis in DesignLife Tutorial 2013

This web-based tutorial will provide an introduction for using nCode DesignLife to perform seam weld fatigue analysis on FE models.

View Webinar Recording


See what's new in Coustyx 4.01

Learn about the latest features and enhancements available in Coustyx 4.01.

View Webinar Recording


Structural damage detection using FRF

Webinar hosted by TechPassion focusing on the detection of strutural damange using the frequency response function.

View Webinar Recording


Structural Damping measurements and Comparison of Components - part 1

Part 1 of a webinar hosted by TechPassion focusing on damping measurements and damping comparison of components.

View Webinar Recording


Structural Damping measurements and Comparison of Components - part 2

Part 2 of a webinar hosted by TechPassion focusing on damping measurements and damping comparison of components.

View Webinar Recording


SwiftComp Micromechanics for the Composites Industry

SwiftComp provides a unified approach to both micromechanics modeling and structural mechanics modeling of composites.

View Webinar Recording


Tension after Impact: Damage Progression Coupling Different Structural FE Solvers in Sequence

Learn how GENOA can be used to couple different analysis types together using different FE solvers so that advanced structures can be analyzed and assessed for damage initiation and propagation, fracture initiation and propagation using the engineering technology of choice.

View Webinar Recording


The Unique Thermal Dynamics of Heavy Vehicles

This webinar will discuss the advantages of using ThermoAnalytics’ software for the modeling of exhaust systems and engines in heavy vehicles. The webinar will be an in-depth look into thermal modeling processes specific to the heavy vehicle industry.

View Webinar Recording


Tips and Tricks for Key to Metals

Learn how to best use Key to Metals for all your material database needs.

View Webinar Recording


Unleash Optimal Plastic Design in 60 Minutes

View a demo of Moldex3D’s ground-breaking product, eDesign Suite, which offers an easy-to-use yet powerful simulation tool to visualize flow and thermal properties to achieve design validation.

View Webinar Recording


Using AlphaCell for quick & accurate sound package design in Heavy Industry

AlphaCell is an accurate solution for predicting the vibro-acoustic performances of sound packages including e.g. poro-elastic materials, perforated plates, visco-elastic materials, studded structures with inner filling, composite materials or materials with embedded inclusions.

View Webinar Recording


Using Design Profit® Custom Math Application to create a cost estimating system.

Design Profit® is a methodology and a process that exposes waste and risk in the product design so engineers can make informed trades to reduce complexity and create elegant designs for downstream stakeholders.

View Webinar Recording


Using Design Profit® MRL to conduct a Manufacturing Readiness Assessment in the Defense Industry

Design Profit® MRL (Manufacturing Readiness Level) provides unparalleled capability to perform a structured, collaborative Manufacturing Readiness Assessment (MRA). Design Profit® MRL exposes risk, rolls up costs and provides direction early at the architecture concept phase.

View Webinar Recording


Using ThermoFlo to speed up your engineering calculations

Learn how to use ThermoFlo to quickly do many of the back of the envelope calculations that are part of an engineer’s everyday life. Quickly size components or get a feel for a temperature without having to use any property lookup tables.

View Webinar Recording


Vibration Fatigue Analysis in DesignLife Tutorial

This tutorial will provide an introduction to performing vibration fatigue analysis on FE models using nCode DesignLife.

View Webinar Recording


Vibro-acoustic Simulations in Heavy Industry

With the help of Coustyx from ANSOL, a powerful fast multipole boundary elements (FMBEM) solver, engineers in the heavy machinery industry can now build intricate models of real life systems and perform vibro-acoustic simulations over a broad frequency range.

View Webinar Recording


Vibro-acoustic Simulations in the Automotive Industry

In this webinar we will provide an overview of Coustyx – its capabilities and benefits. Several applications from the auto industry are also presented.

View Webinar Recording


Virtual Prototyping and Dynamic Load Analysis in Machine Design

Through the development of virtual prototypes of concepts that capture the dynamics of the system (or systems) early in the design process, machine designers can avoid many issues that often arise during the integration and prototyping stages.

View Webinar Recording


VMAP for NVH Industry

Learn how VMAP bridges the gap between virtual prototyping and experimenation in the product design cycle.

View Webinar Recording


VMAP for the Automotive Industry - Modal Testing and Correlation Simplified

In this webinar, we will present an overview of the features and benefits of VMAP. In addition, the webinar will feature a case study that shows users how VMAP can be used to solve vibration problems in automotive products during the early design stages and accelerate product development.

View Webinar Recording


Workflow Optimization using Design Profit

Learn about the workflow optimization capabilities available through the APA, using Design Profit by Munro & Associates.

View Webinar Recording


Workflow Optimization using PTB by SandboxModel

Learn about the workflow optimization capabilities available through the APA, using Project Team Builder by SandboxModel.

View Webinar Recording


Workflow Optimization using Total Materia

Learn about the workflow optimization capabilities available through the APA, using Total Materia by Key to Metals.

View Webinar Recording


Legend public legend Public guest legend Guest member legend Member